High Definition Car DVR
User Manual-- ADX1
Thanks for purchasing our product. This maunal is provided to help you getting good command of product, it will show you how to operate and specification list of product. Before using this product, Please read this manual very carefully and keep it properly. Hope you will like this product and then we can build longterm business relationship in the near future.
[Structure diagram]
[Installation instructions]
[Video]
When the engine starts to work, the DVR will enter into the recording mode automatically, and when the engine stops, DVR will stop recorde too. Or you can press OK button to stop recording manually.
[Photo]
1. Press OK to stop recording (enter into standby mode)
2. Press M button to enter into the photo mode
3. Press OK button to take photos
[Video/Photo playback]
1. Press OK to stop recorde.(enter into the standby mode)
2. Press M twice to enter into the playback mode, on the display shows the blue icon
3. Press Up or Down to select the video to be played
4. Press OK button to confirm to play
[How to enter the menu setting]
1. Press the OK button to stop recorde
2. Keep pressing the button M and there will show the mune
3. Press Up or Down to choose setting you want to set
4. Press OK to enter and change
5. When after finishing set, press M to exit
[Special fuctions]
1. Collision Sensitivity
The Collision Sensitivity function can measure the gravitational acceleration of DVR, sense the vibration between cars when they are crashing. Mean while, the DVR will save the video file which is started from 10 seconds before the accidents and ended 20 seconds after the accidents and will not be covered by circle recording.
2. Parking monitor
Enabling this function, even when off mode, when the car in vibration and the recorder will use the built-in battery automatically start recording, and lock write protection, recording time about 30 seconds then automatic shutdown, in order to achieve savings memory card and battery power. When in vibration again, it re-open again.
3. Motion detection technology
It is generally known as motion detection, commonly used in unmanned video and automatic alarm. when the picture has changed, for example, when people passed by, the lens moved, the system can automatically make the appropriate treatment, however, due to the dynamic changes according to the background image, such as weather, light, shadow and confusion interference, making the motion detection becomes a rather difficult task.
4. Loop recording
If this function is Off, the video file will be saved as a whole video. When the memory card is full, the new records will not replace the old records .2 minutes / 3 minutes / 5 minutes refers to the video will be saved in the form of segments in 2 minutes / 3 minutes / 5 minutes , for example, selecting three minutes, the video will be in a period of 3 minutes to save the records, 3 minutes is highly recommend.
[USB mode/PC camera]
When the DVR had been plugged into the PC by USB cable, the DVR screen will appear 2 options for your choice, press Up/Down button to choose which mode you want to enter into. After choosing well, the LCD of DVR will appear icons of USB Storage Device/PC Camera.
[Low battery warming]
When the DVR detected the low battery, the LCD screen will appear a icon of low battery, the DVR will be powered off within 6-13 seconds and the file will be saved automatically.
[About the TF card]
When you connect the TF card to the PC, you will see folder DCIM, in which includ below floders:
DCIMA: the videos recording by front lens;
DCIMB: the videos recording by back lens;
*MOV: normal videos recording during the driving;
*LOC: videos record by pressing Emergent lock button or G-sensor function
[Reset]
press the reset button and the machine return to normal.
[Interface diagram]
[Notes]
1. Format the new card / other phone memory card before using them.
1080P video data occupy a lot of memory , so please format the memory card or replace another memory card and try again. when it showed "Please format the memory card" or "Memory card error"
2. The product adapt to 5V voltage (directly connected to car cigarette lighter). Make sure that the positive and negative line and the voltage are correct, the company will charge for maintenance fee if it is wrongly used and installed.
Any questions, contact us:
official website:www.andonstar.com Tel: +86-0755-29352558 Fax: +86-0755-29352558 E-mail: sales@andonstar.com ; support@andonstar.com Skype: sisisi1446 VK:vk.com/sinyue Add:4C,4th Floor,L Building,BaiCai Technology Park,LiuXian 1st Road,71 zone BaoAn,Shenzhen,GuangDong,
没有评论:
发表评论